Switch language to:
The SITRANS FCS300 is one of the most compact Coriolis flow sensors on the market. Its small size simplifies installation and replacement, and also allows you to optimize your plant layout by fitting multiple units into tight spaces.
The robust frame and housing of the FCS300 guarantee superior resistance to external vibrations, creating an ideal measurement environment with no twisting. The sensor’s tube features a short length and large diameter, minimizing pressure loss and allowing for a significantly higher mass flow rate through the meter. You benefit from a high turndown ratio of greater than 100:1 along with added flexibility in application sizing and configuration.
In order to make a complete flowmeter system, the SITRANS FCS300 sensor must be combined with the SITRANS FCT030 or SITRANS FCT010 transmitter.
DN15 (½") DN25 (1") DN50 (2") DN80 (3") DN100 (4")DN150 (6")
±0.10% or ±0.20%
2 or 10 kg/m3
DN15: 8,000 kg/h (17,600 lb/h) DN25: 35,000 kg/h (77,000 lb/h) DN50: 90,000 kg/h (198,000 lb/h) DN80: 250,000 kg/h (550,000 lb/h) DN100: 520,000 kg/h (1,146,404 lb/h)DN150: 860,000 kg/h (1,895,975 lb/h)
Wetted parts: 316 L stainless steel, C4 (2.4610) nickel alloy or C22 (2.4602) nickel alloyEnclosure: 304 L stainless steel
All sizes: 100 bar (1,450 psi)
All sizes: -50 to +205 °C (-58 to +400 °F)
Sensor enclosure rating
IP67 (NEMA 4X)
Hazardous: ATEX, IECEx, cCSAusHygienic (DN 25-80): EHEDG
Compactness – enabling smaller and more efficient plant or skid layout and construction
Flexibility – available from DN15 to DN150, ensuring a broad application fit
Easy installation – with a wide range of standard flange, thread and hygienic connectors
High accuracy– ±0.10% or ±0.20% achieved at up to 100 bars and 205 °C
“Plug & Play” – with pre-configured sensor cable
Digitally reliable – all primary process variables are digitally transferred to the transmitter
Global service network – for expert-level support whenever and wherever you need it