Switch language to:
The "Combi-Analyzer" ULTRAMAT/OXYMAT 6 combines the features of the ULTRAMAT 6 and OXYMAT 6 in one analyzer in a 19" rack design.
Most frequently used for demanding applications, the ULTRAMAT 6 must meet high standards with regard to reliability and measuring quality. This is guaranteed by modern electronics, ease of operation and a physical element that is adapted to the measuring task.
Up to two infrared active components and oxygen can be measured in a single analyzer. The use of optical couplers and optical filters in the IR physics increases the selectivity and means that, in many cases, the analyzers can be used for measurements even in complex gas mixtures. It also guarantees measurements of lower concentrations and lower detection limits.
The OXYMAT - Physics is based on the measurement of oxygen using the paramagnetic effect by the alternating pressure method. This guarantees perfect linearity and allows parameterization of minimal measuring ranges of 0 to 0.5 % (detection limit 50 ppm) up to 0 to 100 % or even 99,5 to 100 % in a single device.
Max. number of components
2 IR + O2
O2 and IR-active components
Smallest measuring range
0-0,5 % O2 and IR Component-specific: 0-5 / 0-100 ppm
19“ rack unit
Corrosion-resistant materials in gas path (option): Measurement possible in highly corrosive sample gases
Cleanable sample cells: Cost saving in further use in case of pollution
Open interface architecture (RS 485, RS 232, PROFIBUS)
SIPROM GA network for maintenance and servicing information (option).