SITRANS FCT030

Description

Based on patented digital signal processing technology, the SITRANS FCT030 transmitter delivers true multi-parameter measurements with enhanced efficiency, security and simplicity. It features a modular design for convenient installation and replacement, and can be remote or compact mounted with the entire SITRANS FC sensor range, offering a uniform transmitter interface across the entire Coriolis portfolio.

FCT030 is approved for custody transfer and certified for safety critical applications up to SIL level 3 together with FCS400 sensors. It is a universal transmitter suitable for all industries certified for hazardous areas with ATEX, IEC Ex and FM approvals.

The transmitter is based on the latest developments within digital signal processing technology – engineered for high measuring performance:

  • Fast response to step changes in flow

  • Fast dosing applications

  • Entrained gas

  • High immunity against process noise

  • High turndown

  • Easy to install commission and maintain

 

FCT030 is available as standard with Profibus DP/PA, Modbus RS485 or 4-20 mA analog output with HART 7.2. Additional input / output functions can be freely configured for analog, pulse, frequency, relay or status.

The transmitter comes with user configurable graphical display and new SensorFlash® technology, a micro SD card for configuration backup, firmware update, data storage and data logging.

In order to make a complete flowmeter system, the SITRANS FCT030  transmitter must be combined with one of the sensors:
SITRANS FCS400
SITRANS F C MASS 2100 DI 1.5
SITRANS F C MASS 2100 DI 3-15
SITRANS FC300 DN4

Features

  • Digital signal transfer (Sensor and transmitter)

  • SensorFlash®  removable micro  SD card with data logging functionality

  • SIL3 safety integration certified at design level

  • Modular construction

  • Graphical display, same across PI

  • Certified for custody transfer

  • 100 Hz update rate to all outputs

 

Typical applications: Chemical process industry, Oil & gas industry, Automotive industry and Power generation & utility industry.

Detail

Architecture

Compact or remote configuration

Communication

Profibus DP/PA 4.0, Modbus RS485, HART 7.2

EMC performance

EN 61326-3-2

Material

Aluminium with corrosion-resistant coating

Enclosure rating

IP67

Mechanical load

18 to 1000 Hz random, 3.17 G rms, in all directions

I/O

Up to 4 channels combining analog, relay or digital outputs and binary input

Display

Full graphical display, 240 x 160 pixels

Power Supply

24 to 90 V DC, 100 to 240 V AC

Approvals

Hazardous areas

ATEX, IECEx, FM, NEPSI, CSA, EAC

 

Hygenic

EHEDG

 

Complying with NAMUR

 

OIML R 117

Certificates

Compact system SITRANS FC430

SIL 3


Benefits

  • Graphical display– 240x160 pixel readout with up to 6 views, user programmable

  • Accurate billing – redundancy digital output 90º/180º for billing or dosing control

  • Custody transfer– CT approved system to OIML R117

  • Dosing control – direct control of one or two on/off valves, or one analog valve for dosing applications

  • Alarms & safety– advanced diagnosis and service menu enhances troubleshooting and validation

  • Alarm handling – choice of Siemens or NAMUR standard configurations (NE21 and NE43)

  • SensorFlash provides simple sensor replacement into existing transmitter